C280-6

C280-6

Cat C280-6 Marine Generator Set

Minimum Rating 1760 ekW (2200 kVA) 1760 ekW (2200 kVA)
Maximum Rating 1820 ekW (2275 kVA) 1820 ekW (2275 kVA)
Frequency 50 Hz or 60 Hz 50 Hz or 60 Hz

Teknik Özellikler

Generator Set Specifications
Minimum Rating 1760 ekW (2200 kVA) 1760 ekW (2200 kVA)
Maximum Rating 1820 ekW (2275 kVA) 1820 ekW (2275 kVA)
Frequency 50 Hz or 60 Hz 50 Hz or 60 Hz
Speed 1000 rpm (50 hz) or 900 rpm (60 hz) 1000 rpm (50 hz) or 900 rpm (60 hz)
Emissions/Fuel Strategy EPA Tier 2, IMO II EPA Tier 2, IMO II
Engine Specifications
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Bore 11 in 280 mm
Stroke 11.8 in 300 mm
Displacement 6773 in³ 111 l
Governor Type Electronic Electronic
Fuel System EUI EUI
Compression Ratio 50 Hz 13.1 13.1
Compression Ratio 60 Hz 13:1 13:1
Engine Model In-line 6, 4-Stroke-Cycle Diesel In-line 6, 4-Stroke-Cycle Diesel
Generator Set Dimensions
Length 280.3 in 7120 mm
Width 77.2 in 1961 mm
Height 154.9 in 3934 mm
Weight - Estimated 18000 lb 8165 kg

Avantaj ve Özellikler

A3 ECU

Advantages

CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing

Electronic Advantages

Load feedback, Programmable droop, Adjustable gain, Adjustable fuel/air ratio control, Histograms of engine operation, Cat Messenger display presents diagnostics and other engine parameters

Data Advantages through J1939 Link

Engine speed, Boost pressure, Throttle position, Fuel consumption rate, Inlet manifold temperature, Diagnostic codes and events, Configuration, Desired engine speed, Battery voltage, Engine load, Lifetime totals — engine hours, fuel burned, idle fuel, idle hours, Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset

Customer Interface Panel

Advantages

Interfaces with standard Cat® Marine Monitoring System (PLC in Price List), Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection

Electronic Unit Injectors

Advantages

“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required

Standart Donanımlar

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature