Technicial Specifications
Power Range | 1800-2400 bhp (1342-1790 bkW) |
Speed Range | 2300 rpm |
Emissions | IMO II, U.S. EPA Tier 3 (recreational), RCD, China II |
Aspiration | Sequential Turbocharged - aftercooled |
Bore | 145 mm |
Stroke | 162 mm |
Displacement | 32.1 l |
Rotation from Flywheel End | Counterclockwise |
Configuration | VEE 12, 4-Stroke Cycle diesel |
Flywheel Housing | SAE No. O |
Cooling | SWAC (Seawater Aftercooler) |
Governor | Electronic (ADEM VI) |
Oil Change Interval | 250 hrs |
Refill Capacity | Lube Oil System w/ oil filter change: 76 L (20 gal) |
Dry Weight | 3509 kg |
Length | 2231 mm |
Width | 1474 mm |
Height | 1478 mm |
Advantages and Features
Key Features & Benefits
- Updated engine design to enable higher power density
- Noise reduction at low engine speeds (MEUI-C Fuel System)
- Updated engine electronic control module (ADEM VI)
- MCS certifications available
- Updated seawater aftercooler and HEX design
- Optimized sequential air system maximizes performance and torque range
- LH and RH service side options available
- No zinc anodes required (use vessel bonding system)
Standard Equipment
-
STANDARD EQUIPMENT
- ADEM VI Electronic Control Module
- Air Cleaner / Closed Crankcase Ventilation
- Front and Rear Seawater Pumps
- Sea Water Aftercooler
- Titanium Plate Heat Exchanger
- Gear-driven JW and SW pumps
- Water-cooled Exhaust Manifolds and Turbochargers
- MEUI-C Fuel System
- 250-hr Oil Pan (Shallow Sump)
- RH or LH Service Side Options
Optional Equipment
-
OPTIONAL ATTACHEMENTS
- 120V or 240V Jacket Water Heater
- SAE A or B PTO (RH rear)
- 75A, 105A or 175A Alternator
- Heat Shielding
- Cosmetic Engine Cover
- Electric Fuel Priming Pump
- Duplex Lube Oil and Fuel Filters
- Deep Sump Oil Pan
- Marine Alarm & Protection