C9.3

C9.3

The C9.3 ACERT propulsion engine has a B rating of 375 bhp (280 bkW) at 1800 rpm, a C rating of 416 bhp (310 bkW) at 2100 rpm, and a D rating of 476 bhp (355 bkW) at 2300 rpm. The C9.3 propulsion, auxiliary, and generator set engines have a common rail fuel system for optimal combustion and lower emissions. Cooling system options for the propulsion and auxiliary engines include heat exchanger with sea water aftercooling, and keel with combined circuit or separate circuit aftercooling. The genset packages are available with heat exchanger, keel, or radiator cooling. These products are EPA Tier 3 and IMO II certified. In addition the propulsionengine ratings are EU Stage IIIA certified and auxiliary and gen sets are also CCNR Stage II certified.

Power Range 375-476 bhp (280 - 355 bkW) 375-476 bhp (280 - 355 bkW)
Speed Range 1800 - 2300 rpm 1800 - 2300 rpm
Emissions IMO II, U.S. EPA Tier 3, China Stage II IMO II, U.S. EPA Tier 3, China Stage II

Teknik Özellikler

Power Rating
Power Range 375-476 bhp (280 - 355 bkW) 375-476 bhp (280 - 355 bkW)
Engine Specifications
Speed Range 1800 - 2300 rpm 1800 - 2300 rpm
Emissions IMO II, U.S. EPA Tier 3, China Stage II IMO II, U.S. EPA Tier 3, China Stage II
Configuration In-line 6, 4-Stroke-Cycle Diesel In-line 6, 4-Stroke-Cycle Diesel
Displacement 567.5 in³ 9.3 l
Aspiration Turbocharged - Aftercooled Turbocharged - Aftercooled
Governor Electronic Electronic
Bore 4.5 in 115 mm
Stroke 5.8 in 149 mm
Refill Capacity Lube Oil System w/oil filter change: 24.5 L (6.5 gal) Lube Oil System w/oil filter change: 24.5 L (6.5 gal)
Oil Change Interval 500 hours 500 hours
Flywheel Housing SAE No. 1 (113 teeth) SAE No. 1 (113 teeth)
Rotation from Flywheel End Counterclockwise Counterclockwise
Cooling Heat exchanger and separate or combined keel cooled options Heat exchanger and separate or combined keel cooled options
Dimensions & Weights
Length - Engine 57.2 in 1452 mm
Dry Weight - Approximate 2447 lb 1122 kg
Width - Engine 38.5 in 978 mm
Height 43 in 1093 mm

Avantaj ve Özellikler

Key Features & Benefits

  • Electronic control system provides industry-leading torque and throttle response at low speeds, while maintaining fuel efficiency at high speeds
  • Common rail fuel system enables optimum combustion and low emissions
  • RH and LH locations service options for fuel and oil filters, as well as dipstick location for easily accessible service
  • Compatible with Cat® displays
  • Available remote-mounted display panel with start, stop, and engine diagnostics
  • 12V or 24V electrical system
  • Certified by all marine classification societies

Standart Donanımlar

  • Standard Equipment
    • Water-cooled turbocharger and exhaust manifold
    • Electronic control system
    • Thermostats and housing
    • Gear-driven Sea water pump (self-priming)
    • Common rail fuel system
    • Shell and tube jacket water heat exchanger
    • Corrosion-resistant Sea water aftercooler
    • Engine oil cooler
    • Vibration damper and guard
    • Primary fuel filters

İsteğe Bağlı Donanımlar

  • Optional Attachments
    • Alternators - 24V 70 or 105 amp, 12V 110 amp
    • Closed crankcase ventilation
    • Transmission gear oil cooler (engine mounted for HEX)
    • Additional engine and transmission sensor packages
    • Instrument panels
    • Electric starting motors - 12V or 24V
    • Air starting motor
    • Dual electric starting motors or combined electric/air
    • Electric fuel priming pump
    • Fuel cooler
    • PTO Drives - V-belt pulley stack, stub shaft
    • Duplex fuel and oil filters
    • Double wall fuel rail